UV DTF Transfers

Print Ready

Gang Sheet

Ditch the heat, not the detail! Introducing UV DTF Transfers.

Forget the press! Our UV DTF transfers are vibrant, full-color designs that adhere with a powerful adhesive, no heat required. Customize a wider range of surfaces than ever before – think mugs, water bottles, phone cases, and even wood! Simply apply the transfer and watch your design come to life. Perfect for smooth, hard surfaces, UV DTF transfers offer a durable and hassle-free way to personalize your belongings.

UV DTF Transfer Application Instructions

  1. Make sure the surface is clean, dry, and dust-free. Use alcohol to clean the area if needed so the transfer sticks well.
  2. Gently lift the backing off the UV DTF transfer, being careful not to tear the design.
  3. Place the transfer onto your chosen surface, like glass, plastic, or metal. Take your time to line it up perfectly. Once it is stuck, you won’t be able to lift and reapply.
  4. Gently press down on the center of the transfer and move outwards. Use your fingers or a soft tool to push out any air bubbles or wrinkles.
  5. Once everything is in place, press firmly on the entire transfer to make sure it’s fully stuck to the surface, especially the edges.
  6. Slowly and carefully peel off the clear protective film from the transfer to reveal your awesome design. Be gentle to avoid damaging it. If you have tiny letters or lines, we suggest giving it a few minutes before removing the film.
  7. After removing the film, look over the transfer for any areas that might need a little more pressing. Smooth out any remaining bubbles or wrinkles for a perfect finish!
Shopping Cart
Scroll to Top